330103-00-08-10-02-CN | Proximity Probes | 8 mm Proximity Probes

Model Number: What Each Part Means

330103: Base 8 mm probe (M10×1 thread, no armor)
00: No unthreaded section (0mm)
08: Ultra-compact probe body (8mm long)
10: Short cable (1.0m / 3.3ft)
02: Mini ClickLoc connector with standard cable
CN: Country-specific safety approval

Key Performance

• 🔹 Measure Range: 2mm (80 mils) – works from 0.25mm (10 mils) to 2.3mm (90 mils)
• 🔹 Best Gap: -9 Vdc (~1.27mm/50 mils) for vibration checks
• 🔹 Cable Resistance: 7.59 ± 0.50Ω (1.0m cable)

What’s It Made Of?

Probe Tip: PPS (tough, heat-resistant plastic)
Body: Stainless steel (303/304, rust-proof)
Seal: Viton® O-ring (stops pressure leaks). Not tested before shipping – ask if you need a test.

Work Conditions

• 🌡️ Temperature:
  – Normal use: -52°C to +177°C (-62°F to +350°F)
  – Tip (extra): -52°C to +218°C (-62°F to +425°F)
  – Cable/connector (extra): -51°C to +260°C (-60°F to +500°F)
• 💧 Humidity: Stays accurate (change <3%) at 93% humidity (56 days)

Installation Tips

Wiring: Use 0.2–1.5 mm² (16–24 AWG) wires. 3-conductor shielded triad works best.
Max Wire Length: 305m (1,000ft) from probe to monitor. Long wires may lose high-frequency signals.