330103-00-10-05-02-05 | Proximity Probes | Proximity Probe

Bently Nevada 3300 XL 8mm Proximity Probe | Model: 330103-00-10-05-02-05

What It Does
A tough tool for checking machine vibration. Built to work reliably in rough industrial areas, it measures small movements accurately.

Model Code Breakdown

330103: Base 8mm probe, M10x1 thread (no armor).
-00: No unthreaded part (0mm).
-10: Case length – 100mm (outer shell size).
-05: Total length – 0.5m (1.6ft) from tip to end.
-02: Small ClickLoc connector + standard cable.
-05: CSA, ATEX, IECEx approved (safe for tough zones).

Key Specs

Measures: 2mm (80 mils). Works 0.25mm–2.3mm (10–90 mils).
Best gap: -9Vdc (~1.27mm/50 mils for vibration).
Resistance: 7.45±0.50Ω (0.5m length).
Materials:
Tip: PPS (strong, heat-proof plastic).
Case: AISI 303/304 stainless steel (tough metal).
Weight: 323g/m (11.4 oz).

Works in Tough Conditions

Temperature:
Standard: -52°C to +177°C (-62°F to +350°F).
Extended: Tip (-52°C to +218°C), cable/connector (-51°C to +260°C).
Humidity: Stays accurate (≤3% change) at 93% humidity for 56 days.
Seal: Viton O-ring seals pressure (not tested before shipping).

Install Tips

Wires: Use 0.2–1.5mm² (16–24 AWG). 3-conductor shielded cable works best.
Max wire length: 305m (1,000ft) between probe and monitor.
Note: Long wires may weaken high-frequency signals – check graphs for details.

Safety Ratings

Intrinsically safe: For Class I Zone 0 (with barriers/isolators).
Nonincendive: For Class I Zone 2 (with nonincendive circuits).

What’s Included

1x 3300 XL 8mm Proximity Probe (330103-00-10-05-02-05).
1x 0.5m standard cable with small ClickLoc connector.
Basic install guide.
Download PDF file here:3300 XL 8 mm Proximity Transducer System Datasheet</a