330104-00-09-10-11-CN | Bently Nevada | Armored Probe

Bently Nevada 3300 XL 8mm Proximity Probe (Model: 330104-00-09-10-11-CN)

What It Does

A rugged, non-contact sensor for measuring gaps in industrial machines. This 8mm probe from Bently Nevada has an armored body, a PPS (polyphenylene sulfide) tip, and a stainless steel case. Sealed with a Viton® O-ring to handle pressure between the tip and case.

Key Specs

Brand: Bently Nevada
Model: 330104-00-09-10-11-CN
Type: 3300 XL 8mm Proximity Probe
Resistance: 7.59Ω (±0.50Ω) for 1.0m cable
Power Needs: -17.5Vdc to -26Vdc (12mA max; -23Vdc to -26Vdc with barriers)
Sensitivity: Less than 2mV output change per volt input
Output Resistance: 50Ω
Working Temp: 18°C–27°C (64°F–80°F)
Max Altitude: 2000 meters
Best Target: AISI 4140 steel (for best accuracy)
Tip Material: PPS
Case Material: AISI 303/304 stainless steel

Model Code Explained

330104: Base model (8mm probe, M10x1 thread, armored design)
00: Unthreaded length (0mm)
09: Overall case length (9mm)
10: Total cable length (1.0m/3.3ft)
11: Connector type (mini coaxial ClickLoc with protector, FluidLoc cable)
CN: Approved for China market

Installation Tips

Use with -24Vdc power and 10kΩ load
Set probe gap at 1.27mm (50 mils) from AISI 4140 steel
Avoid voltages above -23.5Vdc to keep full range

What It Works With

Only pairs with 3300 XL 8mm parts (probe, extension cable, proximitor). Accuracy drops if used with targets not made of AISI 4140 steel.

Certifications

Meets CN country-specific approval standards.

Package Includes

3300 XL 8mm Probe
Mini coaxial ClickLoc connector (with protector)
1.0m FluidLoc cable
Download PDF fie here:3300 XL 8 mm Proximity Transducer System Datasheet</a