330104-00-13-10-01-05 | 8 mm Proximity Probes | Bently Nevada

Bently Nevada 3300 XL 8mm Proximity Probe (Model 330104-00-13-10-01-05)

What It Is: A reliable sensor for contact-free measurements. Features a PPS plastic tip (tough and long-lasting) and a stainless steel body (AISI 303/304). A Viton® O-ring seals pressure between the tip and body.

Model Number Explained

Let’s break down 330104-00-13-10-01-05:

• 330104: Base 3300 XL 8mm probe with armor
• -00: Unthreaded length: 0mm
• -13: Body length: 130mm
• -10: Total cable length: 1.0m (3.3ft)
• -01: Small ClickLoc connector (with protector) + standard cable
• -05: Approved for CSA, ATEX, IECEx

Key Tech Specs

Brand: Bently Nevada
Model: 330104-00-13-10-01-05
Type: 3300 XL 8mm Proximity Probe
Resistance: 7.59 ± 0.50Ω (1.0m cable)
Power: Needs -17.5Vdc to -26Vdc (non-incendive) or -23Vdc to -26Vdc with barriers
Output Resistance: 50Ω
Sensitivity: Less than 2mV change per volt of input
Temp Range: 18°C to 27°C (64°F to 80°F)
Max Height: 2000 meters
Best Target: AISI 4140 steel

Install Tips

Seals pressure between tip and body. Use the Viton® O-ring for a tight fit. Keep power between -17.5Vdc and -26Vdc for best results.

What It Works With

Only works with 3300 XL 8mm parts (probes, cables, proximitors). Accuracy drops with targets not made of AISI 4140 steel.

Certifications

Approved for CSA, ATEX, and IECEx standards – safe for use in regulated environments.

What’s Included

1x 3300 XL 8mm Probe (1.0m cable)
1x Small ClickLoc connector (with protector)
1x Viton® O-ring (seal)

Download PDF file here:3300 XL 8 mm Proximity Transducer System Datasheet</a