330130-080-01-05 – Armored Cable – Bently Nevada

Bently Nevada 330130-080-01-05 3300 XL Extension Cable

What It Is

A tough industrial extension cable from Bently Nevada. It’s an 8-meter armored cable (26.2 feet) built to last. Comes with silicone tape (skip it if turbine oil touches the probe-cable joint). Uses smart tech for stronger connections.

Model Number Meanings

330130: Base code for 3300 XL extension cables.
080: Cable length – 8 meters (26.2 feet).
01: Cable type – Armored (thicker, more durable).
05: Certifications – CSA, ATEX, IECEx approved.

Key Specs

Length: 8 meters (26.2 feet).
Weight: 0.824 kg (armored), 0.272 kg (non-armored).
Wire resistance:
Center wire: 1.76 ± 0.26 Ω.
Outer wire: 0.53 ± 0.11 Ω.
Cable capacitance: 69.9 pF/m (21.3 pF/ft) on average.
Power needed: -17.5 Vdc to -26 Vdc (without barriers); -23 Vdc to -26 Vdc with barriers.
Sensitivity: Less than 2 mV change per volt input.
Output resistance: 50 Ω.
Linear range: 2 mm (80 mils), from 0.25 mm to 2.3 mm (10 to 90 mils).

Smart Design

TipLoc: Makes probe tip stick tight to the body.
CableLoc: Holds probe cable secure (330 N pull strength).
FluidLoc (optional): Stops oil/liquids from leaking inside.
Seal: Uses a Viton® O-ring (probes not tested before shipping; ask for tests if needed).

Install Tips

Use 16-24 AWG shielded triad wire for field connections (max 305 meters).
Probe length + extension cable length must equal Proximitor Sensor total length.
Avoid silicone tape where turbine oil hits the probe-cable joint.

Works With

Pairs with 3300 XL 8 mm Proximitor Sensors, probes, and parts. Best with AISI 4140 steel targets – accuracy drops with other targets.Download PDF file here:3300 XL 8 mm Proximity Transducer System Datasheet