330130-085-11-05 – Armored FluidLoc Cable – Bently Nevada

Bently Nevada 330130-085-11-05 Extension Cable

What It Is

This extension cable works with 3300 XL systems. It has an armored FluidLoc design to stop oil or liquid leaks. Comes with silicone tape (not for turbine oil use). Uses patented TipLoc/CableLoc tech to make probe connections stronger. Good for industrial monitoring setups.

Model Numbers Explained (330130-085-11-05)

085: Cable length – 8.5 meters (27.9 feet)
11: Armored FluidLoc cable (stops liquid leaks)
05: Approved by CSA, ATEX, IECEx

Key Details

Length: 8.5m
Weight: 0.875kg (armored), 0.289kg (non-armored)
Resistance:
Core (center to center): 1.87Ω (±0.28)
Jacket (outer to outer): 0.56Ω (±0.11)
Capacitance: 69.9pF/m (typical)
Output Resistance: 50Ω
Voltage Needed: -17.5Vdc to -26Vdc (non-incendive), -23Vdc to -26Vdc (with barriers)
Sensitivity: Less than 2mV change per volt input
Linear Range: 2mm (works from 0.25mm to 2.3mm from target)

Install Tips

Make sure extension cable length + probe length matches the Proximitor Sensor’s total length. Use 16-24 AWG shielded triad field wiring (max 305m/1,000ft).

Works With

Only for 3300 XL 8mm Proximitor Sensors, probes, and parts. Performance specs apply to AISI 4140 steel targets.

Certifications

CSA, ATEX, IECEx approved – safe for hazardous areas.

What’s in the Box

1x 8.5m armored FluidLoc extension cable + silicone tape (to replace connector protectors).Download PDF file here:3300 XL 8 mm Proximity Transducer System Datasheet