Bently Nevada | 330130-040-11-05 | Armored FluidLoc Cable
Description

Bently Nevada 330130-040-11-05 3300 XL Armored Extension Cable

What It Is

A tough extension cable from Bently Nevada for industrial sensor setups. It’s 4 meters long (11.5ft) with an armored FluidLoc design to stop liquids like oil from leaking. Comes with silicone tape (not for turbine oil use) as a connector protector option.

Model Numbers Explained

330130: Base model for 3300 XL extension cables
040: Length – 4 meters (11.5ft)
11: Armored FluidLoc cable (stops liquid leaks)
05: Approved for CSA, ATEX, IECEx

Key Specs

Weight: 0.618kg (103g per meter)
Resistance:
Center wire (RCORE): 0.88Ω (±0.13Ω for 4m)
Outer wire (RJACKET): 0.26Ω (±0.05Ω for 4m)
Capacitance: 69.9pF per meter (typical)
Power: Needs -17.5Vdc to -26Vdc (nonincendive); -23Vdc to -26Vdc with barriers
Sensitivity: Output changes less than 2mV per volt of input change
Output Resistance: 50Ω
Linear Range: 2mm (80 mils), works from 0.25mm to 2.3mm (10-90 mils) → outputs -1Vdc to -17Vdc
Humidity: Less than 3% change in scale factor at 93% humidity (56 days, IEC 68-2-3)

How to Install

Use 16-24 AWG 3-conductor shielded cable with tinned wires. Max field wiring length: 305 meters (1,000ft). Longer wires may weaken high-frequency signals.

Works With

Only for 3300 XL 8mm Proximitor Sensor systems. Accuracy is tested with AISI 4140 steel targets – not for other metals.

Certifications

Safe for hazardous areas – CSA, ATEX, IECEx approved.

What’s in the Box

1x 330130-040-11-05 armored extension cable
Silicone tape (connector protector alternative)Download PDF file here:3300 XL 8 mm Proximity Transducer System Datasheet

Additional information
Weight0.618 kg
Dimensions35 × 32 × 4 cm

Reviews (0)

Ratings

0.0

0 Product Ratings
5
0
4
0
3
0
2
0
1
0

Review this product

Share your thoughts with other customers

Write a review

Reviews

There are no reviews yet.