Bently Nevada | 330130-070-11-05 | Armored FluidLoc Cable

Bently Nevada 3300 XL Armored Extension Cable – 7m Certified Solution

What is 330130-070-11-05?

TipLoc: Stronger bond between probe tip and body.
CableLoc: 330N (75 lbf) pull strength for secure connections.
FluidLoc: Prevents oil/liquid leaks through the cable.
Includes silicone tape (avoid in turbine oil applications).

Decode the Model: 330130-070-11-05

Every digit in 330130-070-11-05 tells a story:

330130: Base model for 3300 XL extension cables.
070: 7.0 meters (22.9ft) cable length – ideal for medium-distance setups.
11: Armored FluidLoc design (extra protection against wear/leaks).
05: CSA, ATEX, IECEx certified – safe for hazardous environments.

Key Technical Specs (330130-070-11-05)

Brand: Bently Nevada (U.S.A. made)
Length: 7.0m (22.9ft)
Weight: 0.721kg (103g/m)
DC Resistance:
Center conductor: 1.54±0.23Ω
Outer conductor: 0.46±0.09Ω
Capacitance: 69.9pF/m (typical)
Power: -17.5Vdc to -26Vdc (12mA max)
Sensitivity: <2mV change per volt input
Output Resistance: 50Ω
Linear Range: 2mm (0.25mm to 2.3mm target distance)
Operating Temp: +18˚C to +27˚C (+64˚F to +80˚F)

Install with Confidence

Use 3-conductor shielded triad cable (16-24 AWG, 0.2-1.5mm²).
Max field wiring: 305m (1,000ft) between sensor and monitor.
Avoid silicone tape where turbine oil contacts connections.

Works With

Only compatible with:

3300 XL 8mm Proximitor Sensors
3300 XL 8mm probes
AISI 4140 steel targets (system accuracy depends on this).

Certified Safety

Approved for hazardous areas: CSA, ATEX, IECEx.

What’s in the Box

1x Bently Nevada 330130-070-11-05 armored extension cable
1x roll of silicone tape (for temporary connector protection).Download PDF file here:3300 XL 8 mm Proximity Transducer System Datasheet