Bently Nevada Proximity Probe Housing Assembly – 31000-16-05-30-050-02-02

Bently Nevada 31000-16-05-30-050-02-02 Proximity Probe Housings – Built for Industrial Toughness

What It Does

Shields 3300 XL 8mm probes from dust, water, and impacts in harsh industrial spaces. Works reliably from -51°C to 105°C—no extreme too tough.

Model Number Breakdown

Decode “31000-16-05-30-050-02-02” to see what’s included:

16: For 3300 XL 8mm probes (connector built-in)
05: 0.5m (20in) probe cable length
30: 3.0in standoff adapter (minimum length)
050: 5in probe penetration depth
02: 2x 3/4-14 NPT fittings + 1 plug
02: 3/4-14 NPT mounting thread (required for the standoff)

Key Materials & Durability

Housing: Glass-reinforced PPS plastic (stops static, tough)
Sleeve & Chain: AISI 304 stainless steel (rust-resistant)
Outer Sleeve & Screws: AISI 303 stainless steel (easy to install)
O-Ring: Neoprene® (seals out moisture/dust)

Performance Ratings

Temperature: -51°C (-60°F) to 105°C (221°F) – works in freezes and heatwaves.
Impact: Withstands 4J hits at -39°C/+115°C (BASEEFA); 7J hits at room temp (CSA).
Seal: IP66 (dust/water tight) + Type 4X (CSA certified) – no leaks, no dust.

Installation Made Easy

Mounting: Use 3/4-14 NPT thread for a secure fit.
Tighten: Retaining nut needs 29.4N·m (260in·lb) – no over-tightening required.

What’s in the Box

1x Proximity probe housing (PPS + steel)
1x Stainless steel outer sleeve (AISI 304)
1x Retaining chain (AISI 304)
1x Neoprene® O-ring
2x 3/4-14 NPT fittings + 1 plug

Why Choose This Housing?

Static-Safe: EN50014 certified for hazardous areas.
Rustproof: Stainless steel parts last longer in wet/dirty jobs.
Perfect Fit: 5in probe depth + 0.5m cable suits most 3300 XL sensors.

Download PDF file here:31000-32000-Datasheet