Bently Nevada 9200 Vibration Sensor
New and original in factory packing. This sensor checks machine health by measuring vibration. The two-wire design is easy to install. It gives accurate speed measurements in factories.
What the Model Number Means
9200-09-01-01-00:
09: Can be mounted at any angle (0 to 180 degrees). Starts working at 15 Hz (900 cycles per minute).
01: Has a top connector (no cable included).
01: Mounting base is round with a 1/4-20 UNC stud.
00: No special approvals needed.
Technical Data
| Brand | Bently Nevada |
| Range | 25 mm/s (1 in/s) at 100Hz |
| Accuracy | ±5% |
| Output | 20 mV/mm/s (500 mV/in/s) |
| Temperature | -29°C to 121°C (-20°F to 250°F) |
| Coil Resistance | 1250 Ohms ±5% |
| Environment | Dust and moisture resistant. Up to 95% humidity. |
How to Install
Use the 1/4-20 UNC stud to mount. Point it the right way (as per calibration). Connect to the top terminals A and B. Use a 10,000 Ohm load.
Works With
Fits standard systems that take vibration speed signals. Use on turbines, pumps, and compressors.
Certifications
No special approvals needed.
What’s in the Box
- 9200-09-01-01-00 Sensor unit
- Neoprene gasket
- Factory papers
Download PDF file here:9200 and 74712 Seismoprobe Velocity Transducers Datasheet – 141626
No products in the cart.
Reviews
There are no reviews yet.